CTL DRY MAGNETIC SEPARATOR,made of magnetic drum ,carbon steel framework,driving motor,and other parts.The magnetic system is enclosed in the drum,which is assembled by ferrite magent or neodymium magnet.As the good magnetic performance in drum surface and the cost-effective .So it is widely used in the application of upgrade of low grade minerals.
The CTL DRY MAGNETIC SEPARATOR has found a wide range of applications such as:
• Iron and steel slag treatment
• Reduced pyrite ash separation
• Calcined ilmenite production
• Metal powder production
• Supergrade magnetic concentrate production
• Removal of ferromagnetic particles prior to highintesity magnetic separation
• Control of iron contamination in glass sand production.
Efficient separation can be obtained with particle sizes in the range of 0.01 to 25 mm. By utilizing separators with different drum speeds, it is often
possible to obtain a high grade concentrate with middlings and tailings as separate products. Often, dry magnetic separation can be more flexible than conventional wet magnetic separation and can provide large savings in grinding costs by recovering the valuable minerals at an early process stage.
Design
The dry drum separator consists of a stationary magnetic yoke with a number of permanent magnets placed insidea rotating drum of nonmagnetic
material. The magnets have alternating polarity and are normally of strontium-ferrite. The revolving drum is made in two versions:
1) for low speed, stainless steel with a replaceable wear cover of rubber, polyurethane or stainless steel and,
2) for high speed, reinforced plastic with rubber or polyurethane wear protection.
The magnetic drum assembly is contained in a dust proof housing with an opening at the bottom for discharge of both magnetic and nonmagnetic
products. These products are separated by means of a splitter placed under the drum inside of the housing. The whole unit can be dust vented by connecting the plant exhaust system to the outlet provided on the housing. Parts of the housing exposed to wear are normally protected by replaceable rubber or steel wear plates. Inspection of the drum and housing is made through inspection hatches. The housing is easily dismantled for erection and maintenance. The feed arrangement is dependant upon local conditions. For run-of-mine fines, a belt feeder is recommended. For other materials, a vibrating feeder, (or in the case of dusty material, completely covered drum feeders) can be used. The housing is equipped with a standard replaceable feed chute. To meet the various requirements the separators are manufactured with two different drum diameters; i.e. 916 and 1200 mm and drum lengths from 300 mm to 3000 mm in. The separator design allows for an easy combination of drums into double- or triple- drum units.
Features:
►The separators are available with dust housing designs and magnetic drum assemblies in several designs to meet varying requirements.
►The dry separator is used for iron ore with particles sizes up to 20 mm.
►The magnetic system is available in five designs and allows for very highest loading with excellent selectivity at highest recovery, which reduces the number of units required. Fewer machines means less maintenance, lower capital and operating costs.
Benefits:
►Efficient separation can be obtained with particle sizes in the range of 0.1 mm depending on moisture content up to 25 mm
►By utilizing separators with different drum speeds, it is often possible to obtain a high grade concentrate with middlings and tailings as separate products
►Often, dry magnetic separation can be more flexible than conventional wet magnetic separation and can provide large savings in grinding costs by recovering the valuable minerals at an early process stage.
You may also interested in below magnetic equipment or magnetic machine:
1. Magnetic separator/magnetic separators;
A: dry magnetic separator,wet magnetic separator,
B: low intensity magnetic separator,mid intensity magnetic separator,high intensity magnetic separator
C: high gradient magnetic separator,slon high gradient magnetic separator,
D: neodymium magnetic separator.
2. Overband manget/overband magnets,Magnetic Drums,Magnetic Pulleys;Magnetic Rollers
A: permanent suspended magent,permanet suspension magnet,permanent overband magnet,permanent cross belt magent.
B: electro magnet,electromagnetic separator,electro overband magent,electro crossblet magent.
C: permanent magentic drum,
D: permanent magnetic pulley
E: permanent magnetic rollers
3. Eddy current separators;
A: concentric eddy current separators
B: eccentric eddy current separators
4. Magnetic solutions EPC.
Right now,Tianli have developed more than thirty series of Tianli brand magnetic separators,Deferrization magnets,and mining equipments,etc.which include hundreds of products with different specifications.Tianli is good reputaion magnet supplier,magnetic separator supplier in china.If you are looking for the quality dry magnetic separator factory,dry magnetic separator products,dry magnetic separator vendor,or dry magnetic separator supplier. Tianli is your good choice.
